Description

INTRON® dClean 2520

Multipurpose additive for diesel fuel

CHEMICAL COMPOSITION

INTRON^® dClean 2520 is blend of organic compounds (polymers) in organic solvents

APPLICATION

INTRON^® dClean 2520  is  a  multipurpose  additive  which  is  used  to improve  the  quality  of  diesel  fuel.  At the recommended dosage, INTRON^® dClean 2520   provides   diesel   fuel   with   the   following performance features:

• Removal of existing injector deposits and keeping the injector nozzles clean
• COMMON RAIL “clean up” & “dirty out” effect
• Protection of the fuel system against corrosion
• Excellent water separability
• Significant increase of the fuel cetane number
• Increase diesel fuel lubricity

Recommended treat rate: 500-750 ppm

INTRON^® dClean 2520 does not affect other diesel fuel properties such as cold flow properties or color of the fuel and does not interfere with other additives used in diesel fuel treatment

PROPERTIES

QUALITY CONTROL

The above-listed data represent average values at the time of going to press of this Technical Information. They are intended as a guide to facilitate handling and cannot be regarded as specified data. Specified  product   data  are   issued   as  a   separate  product specification

STORAGE AND HANDLING

INTRON^® dClean 2520 can be stored and handled at temperatures from 40°C to 50°C.   Carbon   steel,   stainless   steel,   fluorinated polyethylene or Teflon can be used for storage tanks and injection systems. The use of rubber and of polystyrene must be avoided

INTRON^® dClean 2520 is stable for at least 1 year under normal conditions.

HAZARD IDENTIFICATION

Harmful: may cause lung damage if swallowed. Repeated exposure may cause skin dryness or cracking. Vapours may cause drowsiness and dizziness. Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment

SAFETY

When using this product, the information and advice given in our Safety Data Sheet should be observed. Due attention should also be given to the precautions necessary for handling chemicals

Chemical resistant protective gloves (EN 374) Suitable materials also with prolonged, direct contact (Recommended:  Protective index 6, corresponding > 480 minutes of permeation time  according to EN 374): fluoroelastomer (FKM) – 0.7 mm coating thickness Polyethylene-Laminate (PE laminate) – ca. 0.1 mm coating thickness Suitable materials short-term contact and/or splashes (recommended: At least protective index 2, corresponding > 30 minutes of permeation time according to EN 374) nitrile rubber (NBR) – 0.4 mm coating thickness Supplementary note: The specifications are based on own tests, literature data and information of glove manufacturers or are derived from similar substances by analogy. Due to many conditions (e.g. temperature) it must be considered, that the practical usage of a chemical-protective glove in practice may be much shorter than the permeation time determined in accordance with EN 374. Manufacturer’s directions for use should be observed because of great diversity of types

SUPPLIER INFORMATION

Product supplied by PETRONAX

CONTACT INFORMATION

PETRONAX

63069 Offenbach am  Main

Birkenlohrstraẞe 22, Germany

Теl. +49.693.487.70.43

sales@petronaxcorp.com

www.petronaxcorp.com

NOTE

The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may  affect processing and application of our product, these data do not  relieve processors from carrying out their own investigations and  tests;  neither  do  these  data  imply  any  guarantee  of  certain  properties, nor the suitability of the product for a specific purpose.  Any   descriptions,   drawings,   photographs,   data,   proportions, weights, etc. given herein may change without prior information and do not constitute the agreed contractual quality of the product. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed