INTRON® dFlow
cold flow improver for diesel fuel
DESCRIPTION
INTRON® dFlow is a mixture of olefins and derivatives of fatty acid amides in organic solvents.
APPLICATION
INTRON® dFlow is a complex depressor-dispersant additive which improves cold flow properties of the diesel fuel.
Advantages:
- At low concentrations (from 100 to 1000 ppm.) gives highly improvement of CFPP (Cold filter plugging point) and PP (Pure point) of the diesel fuel;
- Fully compatible with the other ingredients of diesel fuel and additives (detergents, stabilizers, anticorrosion etc.);
- Reduces the economical costs of production (optimization of the fuel composition)
PROPERTIES
Appearance | turbid liquid from yellow to brown color |
Density at 40°C | 850-950 kg/m3 |
Viscosity at 50°C | 50-300 mPa∙s |
Flash point | higher than 61°C |
Pure point | 9-27°C |
DOSAGE
Recommended dosage rate of INTRON® dFlow starts from 10 to 1000 ppm Dosage rate depends on the starting physical – chemical properties of the diesel fuel. The appropriate dosage will be determined by our experts after full consideration of diesel fuel properties
ADDITION METHODS
INTRON® dFlow can be added either to diesel concentrated or in the form of basic solution with treaded diesel fuel or with aromatic hydrocarbons.
The most favorable dosage temperature for INTRON® dFlow is 40-50°C. Pipes, which is pumped straight INTRON® dFlow, should be heated to 30-40°C.
The temperature of the diesel fuel, in which INTRON® dFlow is added should be 30-35°C.
INTRON® dFlow equipment for high viscosity additives or oil products both by batch or continuous action.
SAFETY AND FIRST AID
INTRON® dFlow at 20°C is high viscosity liquid which is soluble in hydrocarbons and insoluble in water. When handling with the product you need to wear protective clothing, gloves, goggles and a mask. Prolonged inhalation of vapors may cause drowsiness, headache. In case of contact with eyes or skin causes irritation. When poisoning by inhalation – victim should be removed to fresh air, if stops breathing – apply artificial respiration and seek medical advice. In case of eye contact – rinse with plenty of warm water, and in case of contact with skin – wash with plenty of warm water with soap.
STORAGE AND PACKAGING
Storage time of INTRON® dFlow is 1 year from manufacturing date. Keep the product at temperature not higher than 70°C Product can be supplied by auto or railway tanks, in IBC containers or 200KG drums.
SUPPLIER
PETRONAX GmbH (Germany).
Birkenlohrstr. 22, 63069 Offenbach am Main, Germany
Tel.: +49.693.487.70.43